Intended Use; Technical Data; Operating Elements And Connections - REV Ritter Allegro 0514985555 Mode D'emploi

Dear customer,
Thank you for buying our high quality, expandable gong Allegro. Please read the
following operating instructions through carefully before starting the gong.

1. Intended use

The gong is only designed to be used with the appropriate batteries or with an
8V transformer (only when operating with a wired gong module). Never connect
it to other voltages.

2. technical data

Dimensions Ø x H:
Voltage:
Operating temperature:
Batteries:
Operating frequency of radio module: 433,92MHz
Loudness:
REV Ritter GmbH hereby declares that the model 14985W is in accor-
dance with the underlying requirements and other relevant provisions of Directive
1999/EC. For the complete CE Declaration of Conformity please refer to www.
rev.biz under the article in question.

3. Operating elements and connections

Fig. 1
(1) Volume controller (VOL)
(2) Module slot for wired gong module or radio module
(3) Expansion slot for sound module or USB-module
(4) Battery compartment for 1.5V battery (LR14 Baby)
(5) Connections for bell wiring
(6) „SEL"-selector for melody selection at T3
(7) Slide switch: „SEQ" - for changing melody at T3;
„SET" – to use a selected melody at T3
(8) Rotary switch to select the house code
150 x 50mm
8-12V AC
0° - 40°C
3 x 1.5V LR14 Baby (not included)
max. 80dB(A)
15