Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8.
Open the Maintenance Actions page (Maintenance tab > Maintenance menu > Maintenance Actions),
and then click BURN to save your settings to the device's flash memory. This process also causes the
device to reset.
As you have changed the device's IP address, your connection to the device's management interface
through your browser is no longer available.
9.
Disconnect the device's Ethernet cable from your computer and then connect it to your network.
10.
Access the device's management interface using the device's new IP address.
7 |
P a g e
EN
Publicité
Table des Matières
