Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Power Cabling the Device
The device is powered from a standard alternating current (AC) electrical wall outlet, using the supplied power
cord.
1.
Insert the female connector located on the end of the power cord (supplied) into the device's power
socket located on the rear panel.
2.
Insert the male plug located on the other end of the power cord into a standard electrical wall outlet.
The Power LED (located on the front panel) is lit green, indicating that the device is receiving power.
4 |
P a g e
EN
Publicité
Table des Matières
