Assistance; Technical Data; Dimensions And Weight; Environmental Conditions - WHEELBLADES A Mode D'emploi

• Wheelblades are intended only for manually driven wheelchairs.
• The users (wheelchair users, assistants) must be in full possession of their mental capaci-
ties and must have read and understood the operating manual.
• Wheelblades may only be mounted on the wheels of the front shaft of the wheelchair
(steering wheels). They are designed for wheel diameters of 80 mm to 200 mm and widths
of 20 mm to 60 mm.
• Wheelblades are used to expand the range of motion of a wheelchair user. It is not a sport-
ing device and not designed for the impact experienced during sports.
danger/risK!
if not used properly, dangerous situations may arise which could in turn result
in serious injuries or even death.

2.2 Assistance

Seek the help of an assistant when mounting and dismounting the Wheelblades on the steer-
ing wheels of your wheelchair to prevent the chair from tipping over.

3 technical data

3.1 Dimensions and Weight

Fig. 1: Dimensions
Clamping area for wheel widths
Clamping area for wheel diameters
Weight per Wheelblade

3.2 Environmental Conditions

Temperature

3.3 Label

each Wheelblade is identifi ed by a nameplate and model index with serial number. Make sure
the operating manual matches the model index on your Wheelblade.
14 en
20 – 60 (mm)
80 – 200 (mm)
0,5 (kg)
−20 – +30 (°C)
Fig. 2: Description of nameplate
Serial number
Model index