CyClone SV130 Instructions D'installation Et D'utilisation page 10

4. Consecutively install the filter, the ceramic regenerator, the second filter and the distance ring. Then attach the ventilation unit to the mounting plate.
Filter
Ceramic regenerator
Ventilation unit
Filter
Distance ring
OUTER HOOD MOUNTING
1. Mark the fastening holes for the outer ventilation hood and drill holes for the dowels. For convenience of marking use the back part of the ventilation
hood.
220 mm
Ø6 mm (1/4")
(8 11/16")
4 holes
200 mm
(7 7/8")
2. Insert the dowels from the delivery set into the holes.
3. Disassemble the outer ventilation hood to enable access to the fastening holes.
1 2
Take off the front part of the outer ventilation hood. Remove 5 screws and take off the front part of the ventilation hood.
10 SV130 SV150 Installation - English