Honeywell Home R841C Fiche Technique page 3

CAUTION
1. Disconnect power supply before installing to
prevent electrical shock hazard.
2. Installer must be a trained, experienced service
technician.
3. All wiring must comply with national and local
electrical codes, ordinances, and regulations.
4. Provide disconnect means and overload
protection as required.
5. Do not install where excessive humidity
combined with temperature change can result in
water condensation on the unit.
6. Do not surround the R841 with insulation which
could elevate the internal temperature above
65°C (150°F).
Fig. 3. R841C, F internal schematic and wiring diagram.
Fig. 4. R841D and G internal schematics and connection
diagram.
R841C, D, E, F AND G ELECTRIC HEATING RELAYS
Fig. 5. R841E Internal Schematic and connection
Fig. 6. Connections showing 2 R841D used with one
transformer and thermostat. If mechanical thermostat is
used, set thermostat anticipator at 0.4 A.
3
diagram.
95C-10090B—01