Backlight - SUPPORTPLUS TouchScreen Manuel De L'utilisateur

GB
5. Press device key to select the device that you want to fix (e.g. TV).
6. Press the OK key to save setting and LCD display S u c c e s s f u l
for 2 seconds and exit to current set up state. You can follow the in-
struction on the screen to exit from set up or go to other settings.
TV 010
SUN 11:45
Time Setup?
Lock?
Seccessful
Remark:
You can fix all current device codes.
C. Backlight
If you set "Light ON/OFF" to "OFF", the backlight will never be on
you set "Light ON/OFF" to "ON", the backlight will be lighted up when you
press any key and it will light up for a while even after you finish the operation.
You can adjust the on-time length of the backlight by following steps.
1. Press and hold the "SET" key for more than 3 seconds, then release
the pressed key.
2. Press the
the OK key.
3. Press the or key to select the "Light ON /OFF? ", then press the
OK key.
4. If the screen shows "Light On" (or you press the or to choose ON),
and prees OK.
26
SET 3S
Code Setup?
or
Device Lock?
OK
Lock?
TV
or key to select the "Configure", and then press
or
Configure
OK
Unlock?
DVD
Lock?
DVD
OK
or
OK
hen
. W