Avanti WD361 Manuel D'instructions page 10

b) Be sure that both the clips on each side of the platform and the screw holes align
correctly before inserting the clips in their respective slots on the stability ring as
shown in Fig 2b.
Clip slot on
the ring
Fixing screw
stud on the
back piece
Recessed screw
hole on the
bottom ring
c) Once you have assembled both the platform and stability ring together, using the
screws (2 short) provided firmly secure the stability ring to the platform as shown
in Fig 2b and Fig 2c.
d) Place the water dispenser on the assembled platform and firmly secure the water
dispenser and platform together using the screws provided (2 long self-tapping).
Be sure the power cord fits securely over the cutout in the back panel.
Fig 2b
10
Clip foot on
the ring