Publicité
Les langues disponibles
Les langues disponibles
in Fig.13. and 14.
E.
Step counter scope:0-99999steps
Calorie value scope: 0-9999.9kals
Travel scope: 0-99.999 kilometers (miles)
Fig.15.
The fat measurement result
Displaying an error information
Battery replacement
A.
The system uses a CR2025 (3V) battery. Please replace in time when the energy is insufficient.
B.
Steps for replacement: Unscrew the battery cover and push outward to dismantle the battery cap. Take out the old battery and
insert a new one. Place the battery cover in the battery cover slot, push forward and screw it to complete battery installation.
Remarks
A.
In the adjusting process of above values (except for personal NO.), press and hold on UP and DOWN button for 2s will enter
fast adjustment status.
B.
Under the fat measurement mode and at any item display status, press and hold on SET button for 2 seconds will enter weight
setting mode.
C.
If the fat measurement result display as the picture in Fig.15.,the possible reason may be:
*The measured result exceeds the scope of effective measurement value (the measurement process with the motion picture shown
in the right side picture in Fig.9).
*After pressing the measurement button START, the fingers have not placed on the correct locations (the measurement process
without the motion picture shown in the right side picture in Fig.9).
*During the measurement, the fingers placed on the start buttons did not apply sufficient pressure, causing a poor contact.
*The fingers are too dry, causing a poor contact.
D. The accuracy of pedometer will be affected due to an incorrect carrying of the pedometer.
E. The data is saved when the power supply is on. After replacement of the batteries or cutting off of the power, the various setups
of the system will be restored to the default status.
F. Please do not use the machine if pregnant and those have heart beat regulator, cardiac pacemaker or those with other medical
Publicité
