MOB IT3223 Mode D'emploi page 4

Fig.8.Display the step length
Press and hold on SET button for 2 seconds, it enters the weight setting mode. Press SET button again to enter setting for height,
age, sex, and step length in turn. Press the ▲/▼button to adjust upward/downward of the value for corresponding items. Once
complete, press SET button to confirm and enter the setting for the next item.Fig.4, 6,7 and 8 show the display for weight, height,
age and step length setting respectively. When the value flashes, it is available to adjust the value within the effective value scope.
When gender is at an adjustable status as shown in Fig. 7, the word representing the gender flashes. Press the ▲/▼ button to
choose between male and female.
C. After setting step length, press START button to start the test (as shown in Fig.9). In this case the thumbs should place on the left
/right touching panel respectively and apply pressure (note that the fingers should not be too dry). Result will be shown after 5
seconds (as shown in Fig.10).
Meanwhile, the corresponding shape symbol flashes. Press SET button to return to the fat measurement mode. Use the same
method to set the other groups' fat measurement information.
D .If you already input the personal information of the fat measurement before, it is available to select the group number to start
measurement directly. If there is new user, please select another group for modification, with the steps as stated above.
Fig.9.
Left picture: Waiting for thumbs to put on the touching panels to apply pressure
Right picture: The measurement is in progress. (0 symbol appear in turn and they will not be shown when the thumb do not place on
both touching panel)