IDEAL Vol-Con Mode D'emploi page 3

Features:
• Vibration Mode with indicator movement
• Auto-Switching Voltage/Continuity
Technology
• Independent solenoid and electronic circuitry
design provides back-up voltage indication
for added safety
• Low Impedance
• Replaceable Test Leads
• Shielded probe tips
• Ultrasonically welded and o-ring sealed for
added durability
• Indicates:
• 100-600V AC/DC
• 5-600V AC/DC
To Measure AC/DC Voltage:
• Ensure that the plug for the test leads is fully
seated into the banana jacks.
• Connect the tester in parallel with the load or
circuit.
• The tester indicates the voltage type, DC
polarity, and the voltage level.
Warning
Do not exceed duty cycle specified on tester.
To Test for Continuity
• Ensure that the plug for the test leads is fully
seated into the banana jacks.
• Test for continuity by connecting the tester to
the de-energized circuit.
• If circuit has <500kΩ, the Continuity LED
lights.
• Reversing prods on the circuit under test
verifies continuity versus low voltage +DC.
(61-076, 61-080)
(61-065, 61-067)
(61-076, 61-080)
(61-080, 61-076)
:
3