Table des Matières
Publicité
Cut the materials to size.
Use a suitable tool to drill
a through-hole.
Stainless materials are
strengthened during
screwing in. Oil the stated
thread before screwing in.
Dispose of the materials
in an environmentally-
friendly manner.
1.2. Intended use
This accessory is intended exclu-
sively for installation on the Sortimo
TopSystem.
This product has not been tested for
other purposes. Contact Sortimo In-
ternational GmbH, if you intend to
use it for any other purpose.
2. Installation
2.1. Safety instructions
W A R N I N G
Danger of injury caused by
incorrect torque
If the screw connections are not
tightened to the relevant torque
levels, this may lead to severe to
fatal injuries in the event of heavy
braking or an accident.
▶ Comply with the stated torque
levels.
6
MA 00002 | 2017-06-23
W A R N I N G
Danger of impact from loading
roller coming loose
(#100 000 5338)
If the distance between the loading
roller and the closest cross beam is
greater than 220 mm, the loading
roller can come loose and cause
injury to persons.
▶ Use the assembly rules for the loa-
ding roller.
A T T E N T I O N
Material damage caused by
incorrect positioning of the side
rail
On vehicles with rear doors there is a
danger of material damage. When
the rear door is opened it can collide
with the side rail.
▶ Position the side rail in such a way
that it does not collide with the
rear door.
A T T E N T I O N
Material damage caused by
incorrect positioning of the loa-
ding roller
On vehicles with rear doors there is a
danger of material damage. When
the rear door is opened it can collide
with the loading roller.
▶ Position the loading roller in such
a way that it does not collide with
the rear door.
© Sortimo International GmbH
Publicité
Table des Matières
