Troubleshooting - Genius Feelvita Mode D'emploi

WARNING!
NOTE!

8 Troubleshooting

Always switch off and unplug the appliance (press STOP button) before checking out a problem!
Otherwise you risk injury and electric shock.
Problem
The Feelvita Food Processor won't
switch on
The appliance isn't grating/cutting
properly
ting disc is inserted.
The Feelvita Food Processor switches off
itself when in operation.
The blades or cutting discs are blocked
with food.
Never open the appliance housing!
The lid (2) won't close when the cut-
Instruction Manual
Solution
place.
Check that the Feelvita Food Processor is connected to a
mains socket with power.
The Feelvita Food Processor may have switched off itself
because of overheating. Leave it to cool down entirely and
try again.
Check if the ingredients are suitable for grating or cutting
Ensure that the disc has been inserted correctly. The entire
disc should be sitting on the star-shaped end of the long
The appliance has a safety mechanism that switches it off
automatically if it overheats.
Switch the appliance off and carefully remove the trapped
food!
Check that the bowl (4) and lid (2) are properly locked in
Ensure that the "working side" of the disc is facing up.
(described in section: Tips and tricks).
shaft (9).
37
GB