Assembly Of The Feelvita Food Processor - Genius Feelvita Mode D'emploi

WARNING!

5.2 Assembly of the Feelvita Food Processor

Risk of injury due to cuts.
Handle the blades and discs with care to prevent cut injuries.
Do not touch the blades and disc edges.
ATTACHING THE BIG BOWL
ATTACHING THE LID
NOTE - DOUBLE SAFETY FEATURE: The appliance only works if both the bowl (4) and the lid (2) are
correctly locked into place. When you use the citrus juicer (16) it replaces the lid.
NOTE: When you attach the attachments, note that the spindle is flat on one side, so the attachments
will only fit onto it in a certain position.
Instruction Manual
control panel facing forward.
Press the appliance firmly down onto the worktop to ensure a
strong contact between the suction pads and the surface top.
into place.
Select the attachments you want to use and attach as described in
the following sections.
Twist the lid in an anti-clockwise direction until you hear it click
into place.
Place the appliance on a dry, stable and even worktop with the
„
„
Insert the big bowl (4) with the handle facing forward (4 o'clock
„
position), then twist it in an anti-clockwise direction until it clicks
„
The attachment must be in place BEFORE the lid (2) is attached.
„
Place the lid on the bowl (4) with the feeder (1) in front of the
„
bowl handle (4 o'clock position).
„
Insert the pusher (3) into the feeder (1).
„
29
GB