Genius Feelvita Mode D'emploi page 31

INSERTING THE CITRUS JUICER
NOTE: You don't need the lid when using the citrus juicer.
NOTE: You may have to turn the blade slightly so that it fits on the shaft (9).
Instruction Manual
the shaft.
pressing cone
gearing
sieve
Insert the gearing in the sieve by putting it in the recess and
turning in an clockwise direction with slight pressure until it clicks
into place.
Twist the citrus juicer in a clockwise direction until you hear the
locking hook click into place.
Put the pressing cone on the gearing.
Pick up the small blade (8) with the plastic knob and place it on
„
Lock the lid (2) into place properly (described in the section:
„
Attaching the Lid).
Use the citrus juicer (16) with the big bowl (4).
„
„
Put the short shaft (17) on the spindle in the big bowl (4).
„
Place the citrus juicer (16) on the short shaft. Ensure that the
„
locking hook is behind the bowl handle (2 o'clock position).
„
„
31
GB