Genius Feelvita Mode D'emploi page 30

INSERTING THE BIG BLADE
INSERTING THE EMULSIFYING DISC
INSERTING THE CUTTING DISCS
WORKING WITH THE SMALL BOWL
30
GB
To use the emulsifying disc (10) in the big bowl (4) insert it on the spindle.
„
Lock the lid (2) into place properly (described in the section: Attaching the Lid).
„
NOTE: You may have to turn the disc slightly so that it fits on the shaft.
Instruction Manual
plastic knob and place it on the spindle.
up the cutting discs with the plastic knob. The side of the cutting
disc being used has to face up.
To use the big blade (5) in the big bowl (4) pick it up using the
„
Lock the lid (2) into place properly (described in the section:
„
Attaching the Lid).
To use the cutting discs in the big bowl (4)
„
Put the long shaft (9) on the spindle.
„
Place the required cutting disc on the long shaft (9). Always pick
„
Lock the lid (2) into place properly (described in the section:
„
Attaching the Lid).
Place the long shaft (9) on the spindle.
„
Place the small bowl (7) inside the big bowl (4).
„