SPORTSTECH SX200 Guide D'utilisation page 30

FIG.3:
Slide the Handlebar Post (pt.17) into the handlebar post
housing on the main frame. You will have to slacken the
knurled section of the Spring Adjustment Knob (pt.7)
and pull the knob back and then select and align holes
for the desired height. Release the knob and retighten
the knurled portion.
Remove the bolts and spring washer from the Hand-
lebar Post (pt.17), then fix the Handlebar (pt.18) with
4pcs Ø8 the Spring Washer (pt.19) and M8*15 the
Bolt (pt.20).
ATTENTION: YOU SHOULD FIX THE
HANDLEBAR TIGHTLY
Slide the Computer (pt.23) onto the
Computer Holder (pt.22) with bolt(pt.81)
FIG 3
connect the plug (A1&A2),
FIG.4:
The Pedals (pt.1 L & pt.1 R) are marked „L" and „R" -
Left and Right. Connect them to their appropriate crank
arms. The right crank arm is on the right- hand side
of the cycle as you sit on it. Note that the Right pedal
should be threaded on clockwise and the Left pedal
anticlockwise.
FiG 4
7