Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V 4.0
FEATURES
Please refer to fig.1 to familiarize yourself with the major components of this tool before using it.
1. Spindle Lock Button
2. Grinding Wheel
3. Wheel Guard
4. Auxiliary Handle
5. Brush Cap
6. Trigger Switch
7. Lock-off Button
ACCESSORIES
Description
Spanner
Auxiliary handle
Instruction manual
Grinding Wheel
ASSEMBLY
WARNING: Prior to assembly and adjustment always unplug the tool.
INSTALLING THE GRINDING WHEEL
1.
Depress and hold down the spindle lock. To prevent damage to spindle or spindle
lock, always allow motor to come to a complete stop before engaging spindle lock.
2.
Remove the outer flange with spanner turning in anti-clockwise direction. Do not
remove the inner flange.
3.
Make sure the slot on the inner flange is engaged with the square neck of the spindle.
4.
Place the grinding wheel over the spindle with the depressed center against the
inner flange.
5.
Depress and hold down the spindle lock again, mount the outer flange and securely
tighten it with spanner provided clockwise. Do not over tighten it.
MOUNTING THE AUXILIARY HANDLE
The tool has three screwed holes on top, left and right side of the gear housing. Operators can
choose any one of them to mount the auxiliary handle depending on specific working condition
and their own habit.
6
5 in. Angle Grinder
1
2
QTY
1
1
1
1
4
3
For technical questions call 1-800-665-8685
8535023
7
6
5
FIG. 1
Publicité
Table des Matières
