KitchenAid 5KHBC412EXX Mode D'emploi page 33

Mixeur plongeant professionnel
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OPERATING THE COMMERCIAL IMMERSION BLENDER
4. Insert the whisk into the mixture.
NOTE: The Commercial Immersion
Blender should only be immersed in
liquids the length of the attachment.
To avoid damage to the blender, do
not submerge beyond the seam of the
blending attachment. Do not immerse
the motor body into liquids or
other mixtures.
5. Press the LOCK switch to unlock the
Commercial Immersion Blender, then
press and hold the POWER/PULSE
trigger to activate.
Lock
Power/
Pulse Trigger
For best results, insert the Commercial
Immersion Blender with the whisk attached
into the pot or bowl containing ingredients
at an angle. Use your free hand to hold
the pot or bowl or hold the Commercial
Immersion Blender near the base of the
motor unit for better stability. Remember
to stop the Commercial Immersion Blender
before removing it from the pot or bowl
to avoid splashing.
Blending
Using a light circular motion from your
wrist, draw the whisk up slightly and let
it fall again into the ingredients. Allow your
wrist motion and the weight of the whisk
to do the work. Use the removable
secondary handle, if needed, for extra
stability while mixing.
6. When blending is complete, release
the Power/pulse trigger before removing
the Commercial Immersion Blender
from the mixture.
7. Unplug immediately after use, before
removing or changing attachments.
Wrist
movement
17

Publicité

Table des Matières
loading

Table des Matières