Oil Feeding And Mixing - Maruyama MS0735W Manuel D'utilisation

The adjustment of waist stabilizer
Loosening the adjuster lever, pull out the
1
waist stabilizer.
Adjuster lever

Oil feeding and mixing

Oil feeding
・Make sure you use blended fuel.
Gasoline :
25 :
Use exclusive oil for two-cycle engine engines.
Neither overfill nor
spill the fuel on to
the engine.
filler opening
DANGER
There is a possibility of fuel igniting. Make sure
you observe the following items.
・When feeding fuel, stop the engine and ensure no
source of fire such as cigarette is close to the area.
・Don't spill fuel. If fuel is spilled, wipe it all off
at once and start the engine after it is dry.
・When a fuel leakage is found, use the
engine after repair are done.
・After feeding fuel, make sure you close the
fuel tank cap.
・When starting the engine, be more than
three meters from the supply tank.
2
CAUTION
exclusive oil
Mixing chemicals
1
・Read the instructions for the chemical to be
・After confirming the proper placement of the
6
Shoulder the machine, push the waist
stabilizer from both sides.
・Use lead-free gasoline for automobiles for
fuel.
used carefully and follow the mixing method
and cautions for use.
chemical tank lid
chemical cover, close the cover securely.
Otherwise, chemicals will spill and you might
be covered with them when you carry the
machine on your back.
Close securely
English