Technical Information; Power Supply; Installation - FAR MWC25 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ENGLISH

TECHNICAL INFORMATION

MODEL NO.
OUTPUT POWER
INPUT POWER

POWER SUPPLY

INSTALLATION

1. Take out all the packing. If there is a safe film
over the oven, tear it off before Use. Check
carefully for damage. If any, immediately
notify dealer or send to the manufacturer's
service center.
2. Microwave ovens must be placed under dry
and non-corrosiveness environments, kept
away from heat and humidity, such as gas
burner or water tank.
3. To ensure sufficient ventilation, microwave
ovens shall be placed against a wall, the side
to the wall should be at least 5 cm, the free
distance above the top surface at least 20 cm.
the distance of the microwave to the ground
should be at least 85 cm.
GB-14
MWC25
900W
1400W
1300W (Grill)
2300W (Convection)
230V ~ 50 Hz
4. The position of the oven shall be such that
it is far from the TV, Radio or antenna as
picture disturbance .The distance should be
more than 5m.
5. The appliance must be positioned so that the
plug is accessible, and must ensure a good
grounding in case leakage, ground loop can
be formed to avoid electric shock.
6. The microwave oven must be operated with
the door closed.
7. The microwave oven must not be placed in a
cabinet. The microwave oven is intended to
be used freestanding.
8. As there is manufacturing residue or oil
remained on the oven cavity or heat element,
it usually would smell the odor, even a slight
smoke, It is normal case and would not occur
after several times use, keep the door or
window open to ensure good ventilation. So
it is strongly recommended to set the oven to
grill mode and operate dry several times.
ENGLISH
GB-15

Hide quick links:

Publicité

Chapitres

Table des Matières
loading

Table des Matières