Supernova Nex 750B Cable Configuration; Supernova Nex 750B Specification - EVGA SUPERNOVA Bronze NEX750B Mode D'emploi

4. Connect the 24-pin ATX cable to the motherboard.
5. Connect the 4+4-pin EPS12V cable to the motherboard.
(Optional) – If you plan on extreme overclocking and your
motherboard supports additional 8pin or 4pin CPU power
connectors, connect the second 4+4-pin EPS12V cable. This is
only needed for heavy overclocking or for Dual CPU motherboards.
6. Connect the 6/6+2-pin PCI-E cables to your graphic card(s).
NOTE: Do not attempt to plug an 8-pin PCI-E cable into a 6-pin
connector without first detaching the two extra pins.
7. Connect SATA power cables to all data drives or optical drives.
(hard drives, solid state drives, optical drives)
8. Connect the peripheral "Molex" 4-pin connectors for fans, pumps,
legacy components and other devices/adapters.
9. Connect the AC power cord to your power supply and to the wall.
Check all connections to assure a solid connection and turn the
power switch on the power supply to the ON position.
English
750W Bronze Power Supply User Manual
4

SuperNOVA NEX 750B Cable Configuration

Modular Connector Cables
MB 1x 24 pin ATX
CPU1 1x EPS12V 4+4 pin
Hard Lined
VGA1 1x PCI-E 6+2 pin
CPU2 1x EPS12V 4+4 pin
VGA2
2x PCI-E 6+2 pin
VGA3
SATA1
SATA2 3x 3 SATA 5 pin
SATA3
PERIF1 1x 3 Molex 4 pin
PERIF2 1x 2 Molex 4 pin + 1 Floppy
SuperNOVA NEX 750B Specifications
EVGA
SuperNOVA NEX750W BRONZE
100-240 VAC~, 12-5.5A, 50-60 Hz
AC Input
DC Output +5V +3.3V +12V1
25 25 20
MAX output, A
150
Combined, W
Output power,
Pcont
Dimensions: 85mm (H) x 150mm (W) x 180mm (L)
Over Voltage Protection, Under Voltage Protection, Short Circuit Protection, Over Power Protection,
Over Current Protection, Over Temperature Protection.
750W Bronze Power Supply User Manual
Cable Color +12V Rail
+12V1
+12V1
+12V2
+12V3
+12V4
Black
+12V4
+12V3
+12V3
+50°C ambient @ full load
+12V2 +12V3 +12V4 -12V
20 20 20 0.8
61A / 732W 9.6
750W @ +50°C
5
+5Vsb
3
15
English