Care And Maintenance - Intenso 7 WEATHERMAN Mode D'emploi

CARE AND MAINTENANCE

Care
In order to prevent danger from electric current do neither remove screws nor the case of the weather station .
Do not operate this device near water. Do not expose the device to rain and moisture. Do not put any objects which store water or
other fluids near the device.
Do not install the picture near heaters, ovens or other heat issuing devices .
Do not open the case. Do not try to repair the device yourself but have it repaired by qualified personnel only.
Fully insert the power supply plug into the opening of the WM. This will prevent electrostatic charge.
Correctly and safely connect all ports.
Do not push onto the display. Protect the display from direct sunlight.
The WEATHERMAN only plays compatible data formats.
Images may be protected by the rights of third persons . The play back without licence may infringe copyrights .
When in operation, do not touch the WM with metal objects.
Avoid operating the device on pillows, sofas or other objects which support the development of heat as there is danger of
overheating of the device.
Do not remove memory cards during read operation. This may cause system crash or data loss.
Do not switch off the device during an ongoing slide show.
Do not wrap up the device directly after longer use. Ensure sufficient enough cooling. Otherwise, there is danger of overheating .
In order to ensure a better service, changes of the operating instructions may be necessary.
EN - 22