Using Memory Devices - Intenso 7 WEATHERMAN Mode D'emploi

USING MEMORY DEVICES

Insert the SD / MMC / MS card with the contact facing in the direction of the display in the 3-1 card slot. USB memory devices can be
connected to the WEATHERMAN by inserting the device in the USB slot (USB host).
Note:
Please do not use force when inserting memory cards.

The 3-in-1 card reader can only read one card at a time. Please do not insert more than one SD / MMC or MS card in

WEATHERMAN at the same time.
Do remove a memory card connected to the WEATHERMAN, carefully pull it from the slot. (Note: SD and MMC cards are fitted with a

groove. You can use your finger nail to remove the card from the slot more easily)
EN - 7