Weather Mode - Intenso 7 WEATHERMAN Mode D'emploi

WEATHER MODE

Outdoor sensor:
Allows readings on outdoor weather.
The maximum distance between sensor and station should not exceed 25 meters.

In case of interference or disruption, no weather information can be displayed. Check battery level and move the outdoor sensor to

another location if necessary.
Weather display
Press the Weather-button on the remote control or select Weather from the main menu. The
weather will now be displayed.
There are two different display modes for the weather mode. You can either only display the
current weather conditions, or view a slideshow. If you choose the slideshow, the display will
switch between a photo from the selected memory device and the current weather conditions.
The display mode depends on your photo settings. To make changes, go to the main menu, then
settings and then select photo settings.
If you select slideshow under the photo settings menu, the device will only display the current
weather conditions when in weather mode. If you select photos with weather, the device will
always switch between photos on your memory device and the current weather conditions.
EN - 9