Maintenance; Storage; Washing; Repairs - Kortel Design Koncept Notice D'utilisation

Maintenance

Storage

Choose a dry, temperate place, sheltered from the light. Avoid compressing the back protection.
Be careful not to bend parts of the harness that contain foam or plates.

Washing

You can wash your harness with fresh water and mild soap and dry it in a dry, airy place. Remember to remove the back
protector (foam) if it is removable.
Do not use a tumble dryer, and do not exceed 30°C for washing.
Rinse carefully, dry in a dry place avoiding unnecessary sunlight.
In case of splashdown :
- In sea water: rinse your harness in fresh water before following the process described above.
- In fresh water, follow the washing process.

Repairs

In case of tears, altered seams, premature wear, please contact your dealer who
will direct you to the appropriate structure for repairs.
If you have any doubts, do not hesitate to contact our workshop directly by email
at sav@korteldesign.com
In the event of a hard landing, it is imperative to check the following points:
- Check that your reserve parachute is not tampered with and check its extraction.
- Check that the back protection is in good condition, that there are no holes in the
cover, and that it has returned to its original shape.
- Check that your board is not broken.
- Check that there is no destructive abrasion on any part of the harness, including
the seams.
for advice and, if necessary, an estimate for repairs.
Koncept