IKEA FRAMTID OV10 Mode D'emploi page 13

ENGLISH
Release the locking system to remove the in-
ternal panel of glass.
90°
Turn 2 fasteners by
90° and remove
them from their seats.
Clean the glass panels with water and soap.
Dry them carefully.
Inserting the door and the glass panels
When the cleaning procedure is completed,
insert the glass panels and the oven door. To
do so, follow these steps in reverse. Make sure
you put the glass panels back in the correct
order.
2
1
Carefully lift and re-
move the panels of
glass one after an-
other. Start from the
uppermost.
Make sure you insert the internal panels of
glass into the right seats as shown below.
Side rails
To clean the side walls of the oven cavity, re-
move the side rails.
13