Aerus Air Scrubber Mode D'emploi page 15

R E P L AC I N G T H E B A L L A S T
6. To reconnect wiring, insert wire into wire pocket in ballast until bottomed. Gently pull wire to
ensure it is properly locked into place.
7. Replace cover and secure with
the original four (4) screws.
(co n t i n u e d )
LED INDICATOR
8. Re-install unit if removed from duct. Reconnect
power cord, turn breaker or fuse power back on
and check for proper operation (LED indicator
should be lit when in operation).
15