Leviton A8911 Manuel D'installation Et D'utilisation page 4

WARNING:
• TO AVOID FIRE, SHOCK OR DEATH; TURN OFF POWER at circuit breaker or fuse and test that the
power is off before installing product or servicing current transformers.
• TO AVOID FIRE, SHOCK OR DEATH; Look inside the meter and electrical panel for possible exposed
wire, broken wire, damaged components or loose connections.
• Make sure all tools used during installation have proper installation ratings.
• Installations should be done in accordance with local codes and current National Electric Code
requirements, and performed by trained, qualified professionals.
• Equipment used in a manner not specified by this document impairs the protection provided by
the equipment.
CAUTIONS:
• Verify the model number and electrical specifications of the device being installed to confirm they are
appropriate for the intended electrical service (see Section 3).
• Consult local codes for any possible permits or inspections required before beginning electrical work.
• Ensure the conduit for the installation is flexible and non-metallic. For outdoor applications conduit and
conduit fittings must be rated UL Type 4X for outdoor enclosures. Failure to use the appropriate conduit
impairs the degree of equipment protection.
PRODUCT APPLICATION LIMITATION:
• Leviton products are not intended for use in critical applications such as nuclear facilities, human
implantable devices or life support. Leviton is not liable, in whole or in part, for any claims or damages
arising from such uses.
• Leviton strongly believes in continuous improvement, therefore we must reserve the right to change
specifications and product offerings without notice. Where possible, we will substitute products with
equivalent functionality when necessary.
This product is not intended for life safety applications.
Do not install this product in hazardous or classified locations.
The installer is responsible for conformance to all applicable codes.
NOTICE