Laurastar Smart App; Installation And Storage - LauraStar SMART Mode D'emploi

LAURASTAR SMART APP

1
DOWNLOAD
the Laurastar App
If you have it already, make sure that the App is
up to date.
2
CONNECT
your smartphone to your Laurastar
Insert the power plug of your Laurastar into the wall
socket. Activate Bluetooth on your smartphone
or tablet.
On your Laurastar, push the
keep it pressed and push the
(16).
Release the 2 buttons. All the user interface LEDs
will flash during 20 seconds.
A
fan speed button (19),
main ON/OFF button

Installation and storage

B
Installing your ironing system
• Remove the appliance from the box and position it vertically on the
ground in a closed position.
• With one hand, grasp the board at the iron-rest (6) in close position.
With the other, grasp the board (1) at the middle, then tilt it horizontally
(maximum height).
• Unfold the iron-rest to the open position.
• Fit the ironing board cover (4), securing it from the side of the iron rest
to the tip of the ironing board, then adjust. The cover supplied with
this product is specially designed to ensure uniform distribution of air
over the whole board in vacuum or blower mode. Use only a Laurastar
approved cover to ensure that its effectiveness is not impaired. The
cover is washable at 30°C (warm water); do not spin dry.
• Take the iron (2) out of its safety storage box (5) and place it on the
iron-rest (6).
• You can fold the iron-rest into the close position (6a) if you desire.
• Insert the steam hose holder (8) in one of the two holes beside the
C
iron-rest (6), fix the steam hose on the steam hose holder (3a). Insert
the protective soleplate hook (28) in the other hole.
• You can lower the table height by clamping the handles (7). There are
six levels. To lift the table, simply pull it up without using the handles.
• To move your Laurastar, simply raise the tip of the board and roll.
- 6 -
user interface
This process can be repeated if the time
available is not sufficient. Once the
connection established, it is not necessary
to reconnect the same smartphone or tablet.
3
LAUNCH
the App
Launch the Laurastar App and follow the
instructions on your smartphone or tablet.
A B
C
LAURASTAR
EN