BabyGo Hugly Instructions De Montage page 17

Join the support frame and the base tubes together, push the ends into
the both base tubes housing until the snap pins click and lock into place.
Fig.2 No.2
Connect the support frame with the power unit assembly on the step 1.Push
the free ends together until the snap pins click and lock into place. (Fig.2 No.3)
Join the free ends of the power cables from the support frame and the drive
box (Fig. 2 No.4)
Electric Baby Swing
Fig.2
3. Join the swing frame into the corresponding
housing of the drive box, fix with the given
screws of spare parts bag and ensuring to
screw up (Fig. 3).
Fig.3
17