Turning on or off the Peak Demand function
Display Type A
You can turn on or off the Peak Demand Off (Override Mode) Function. For more
information on the Peak Demand function, see the SMART GRID Function (Demand
Response) (applicable models only) section.
1. Tap any button ( ,
- This step may not apply to some models.
2. Press the
button for 3 seconds, while not changing other display settings.
3. When the Peak Demand Off function is deactivated, if you press
the Peak Demand Off function will be activated (
4. When the Peak Demand Off function is activated (
3 seconds the Peak Demand Off function will be deactivated.
Display Type B, Type C
You can turn on or off the Peak Demand function. For more information on the Peak
Demand function, see the SMART GRID Function (Demand Response) (applicable models
only) section.
1. Tap any button ( ,
- This step may not apply to some models.
2. Tap
until the Peak Demand indicator blinks.
3. Tap
or
to turn on or off the function.
- Tap
to turn it on.
- Tap
to turn it off.
4. Wait for 5 seconds or tap
- The Peak Demand indicator stops blinking.
Activating or deactivating the Sabbath mode (applicable models
only)
The Sabbath mode stays active for 85 hours once it is activated. After that, it will be
deactivated automatically.
• To activate or deactivate the Sabbath Mode, tap and hold
seconds. Then, when the display blinks, tap
- When the refrigerator is in the Sabbath mode, the buttons, display, and internal
lights do not function. The refrigerator and freezer, however, continue to cool.
NOTE
• If the refrigerator powers off and restarts (for example, if there is a power failure),
the Sabbath mode remains active. To end Sabbath Mode, you must deactivate it as
instructed above.
Untitled-2 39
, or
) to wake up the display.
, or
) to wake up the display.
to confirm your selection.
button for 3 seconds
).
), if you press
and
simultaneously for 6
.
button for
English
39
2021-07-14
10:27:26