Gaggia Caffitaly Mode D'emploi page 18

INSTALLATION / VENTILATE
18
Check that all components
are correctly placed.
Vedi
See rating
targhetta dati
plate
Connect the plug placed at
the opposite side of the ca-
ble to an adequate socket.
Wait until a steady stream
nozzle.
Remove the lid and take
the water tank out.
The machine is warming up;
"I" to turn on the machine.
Put the knob again in the Remove the container.
central position to end the
circuit loading.
Fill the tank with fresh drin- Fit the water tank and
king water. place the lid again.
Place a container beneath
the steam tube.
The machine is ready for
use when the light is stea-
dily lit.
Put the plug into the soc-
ket placed on the machine
rear.
Rotate the knob to start
loading the circuit.
Note: You must load the circuit
before starting up the machine
completely emptied. The circuit
must be al-
so loaded
each time
the light is
steadily lit: