Introduction; Safety Instructions - Omnitronic CDP-744 Mode D'emploi

For your own safety, please read this user manual carefully
All persons involved in the installation, operation and maintenance of this device have to:
- be qualilfied
- follow the instructions of this manual

1. INTRODUCTION

Thank you for having chosen a OMNITRONIC CDP-744. You have acquired a reliable and powerful device. If
you follow the instructions given in this manual, we can assure you that you will enjoy this device for a long
time.
Unpack your OMNITRONIC CDP-744.
Please make sure that there are no obvious transport damages. Should you notice any damages on the A/C
connection cable or on the casing, do not take the device into operation and immediately consult your local
dealer.

2. SAFETY INSTRUCTIONS

This device has left our premises in absolutely perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual.
Important:
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will
not accept liability for any resulting defects or problems.
Always plug in the power plug least. Make sure that the power-switch is set to OFF position before you
connect the device to the mains.
OPERATING INSTRUCTIONS
&'3
'XDO&'3OD\HU
before you initial start-up.
18