Power Fist 8959850 Manuel De L'utilisateur page 7

4. Stand as far back from the battery as possible, and do not face battery
when marking final connection.
5. Carefully connect the NEGATIVE (BLACK) charger clamp to the free end of
the battery cable connected to the NEGATIVE terminal.
6. When disconnecting charger, always do so in reverse sequence of
connecting procedure and break first connection while as far away from
battery as practical.
•
Check unit periodically for wear and tear. Take to a qualified technician for
replacement of worn or defective parts immediately.
•
Read and Understand This Instruction Manual Before Using This Unit.
SAVE THESE INSTRUCTIONS
FEATURES:
•
Charges battery in stored vehicles
•
Fully automatic; powers on when needed, power off when battery is fully-
charged
•
Built-in circuit protection guards against overcharging or short circuit
•
Automatically checked for correct polarity(requires a minimum of 2.0 volts
battery voltage)
•
Convenient, color-coded clamps for easy, correct installation
•
Charges with high frequency, pure DC current
•
Indicators:
A. Rea Fault LED
B. 5 Charge status LED
C. Blue Standby LED