Technical Specifications; Functions - Phonocar Plug&Play VM550 Notice D'utilisation

PORTABLE CD PLAYER FOR CAR RADIOS AND MEDIASTATIONS
PLUG&PLAY INSTALLATION VIA USB PORT
Only compatible with Car radios and Mediastations enabled to play MP3, WMA, WAV files
with USB 2.0 multimedia port
Portable CD player designed for car radios and mediastations without this function.
Plug&Play installation via USB port: no need to take the vehicle to an installer, once connected it is ready to use.
How do I connect it?
Simply connect it to your system via the USB port on your car radio or mediastation (both standard and aftermarket) and it's
ready to go.
How does it work?
Once connected, the player can be controlled directly from the car radio or mediastation using the usual Play/ Pause, Next Track/
Previous Track controls. etc.

Technical Specifications

- Supported CD formats CD-ROM, CD-R and CDR-RW
- Supported audio files: MP3, WMA and WAV
- 5V power supply through USB 2.0 port
- 60 cm USB cable and 90 cm USB extension cable
- 1 fixing bracket for possible permanent installation in the glove compartment or other part of the passenger compartment
Connect Player to the system
1. Connect the VM550 Player to the system with the USB cable provided.
2. Insert a CD and wait for the player to be recognised by the car radio/mediastation (approx. 20 seconds).
After recognition, the player will automatically start playing tracks.
3. Manage the player directly from the car radio/mediastation.

Functions

1 to eject a CD
2 USB extension cable
3 fixing bracket
1 2 3
3
VM550
EN