Bushnell TOUR V4 SHIFT Mode D'emploi page 8

PinSeeker (LCD Indicator - ) Ever have trouble getting distance to the flag? This advanced mode allows easy
acquisition of the flag without inadvertently getting distances to background targets (i.e. trees) that have
stronger signal strength.
Press the POWER/FIRE button to turn the unit on. Next, align the aiming circle reticle onto the flag that you
want distance to. Then, press and hold the POWER/FIRE button and move the laser slowly over the flag or
desired object until a circle surrounds the flag indicator. If the laser beam recognized more than one object
(i.e. flag and background trees), distance of the flag will be displayed and a circle will surround the PinSeeker
indicator informing the user that distance to the flag (i.e. closer object) is being
displayed in the LCD (as seen below). There may be times when only the laser
beam only sees one object in its path. In this case, the distance will be displayed,
but because more than one object was not acquired, a circle will not surround
the flag indicator.
TIP: While pressing the POWER/FIRE button, you can move the device slowly
from object to object and intentionally force the laser to hit multiple objects
to ensure that you are only displaying the closest of the objects recognized by
the laser.
About JOLT
The JOLT feature provides a vibration signal (similar to setting a cell phone to
"vibrate") that will be felt when the Pinseeker technology indicates the flag has
been detected and the distance to it is displayed in the LCD.
8