Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1.
Power indicator light (green)
2.
Silent function indicator light (green)
3.
Tank full indicator light (red)
4. Display
To show the relative humidity percentage level, error codes, the delayed start or delayed stop time.
5.
Auto defrosting operation (green)
6.
Timer indicator light (green)
7.
Continuous dehumidifying mode indicator light (green)
8.
Continuous dehumidifying mode button
9.
Timer button
Press this button to select the delayed start or delayed stop function, in conjunction with
10.
and
buttons
11.
Silent mode button
12.
Power button
Power On and Off
Press
to turn on the appliance.
The display will show the ambient humidity level.
To turn off the appliance, press
Wait for 3 minutes before resuming operation
If power is restored after a power failure, allow approximately 3 minutes for the appliance to continue to
operate at the selected settings.
Dehumidifying Mode
To operate the appliance in the dehumidifying mode, repeatedly press
indicator light goes out.
1. Repeatedly press
again.
to set the desired humidity level in 5% increments.
/
5
until the corresponding
GB
/
.
Publicité
Table des Matières
