2. Pour out the water.
3. Push the water tank gently all the way in.
Failing to push the tank securely may cause
the appliance to stop operating.
4. When the tank is put back, the appliance will start operating. The indicator light
and "P2" will disappear from the display.
NOTE:
Never drink the water or use it to water plant.
After you remove the water tank, do not touch internal parts of the dehumidifier. It could damage the
appliance.
Continuous External Draining
If the appliance is to be operated for long periods but you are unable to empty the tank, it is recommended
to use the continuous drain facility.
1. Remove the rubber plug from the drain outlet.
2. Fasten a hose (not supplied) to the drain outlet.
Make sure that the hose is not higher than the outlet; otherwise water will remain in the tank. Also
check that the hose is not kinked.
3. Lead the water hose to the floor drain or a suitable drainage facility.
The drainage facility should be lower than the drain outlet.
NOTE: When the continuous drain facility is not being used, remove the hose from the outlet and attach
the rubber plug back to the drain outlet.
8
GB
will go out