Portamate PM5000 Manuel De L'utilisateur page 5

6
Screw 3-point knob I into top frame  to hold
outrigger supports D into place.
Never open outriggers wider than where the 3-point
knob can securely hold them in place.
Repeat on other side.
7
Line up the Roller Support Adjustment Knob H to
the hole in the end of the "T" Assembly E.
Drop the Roller-Supports F into the hole and
slide across the "T" Assembly E.
Repeat on other side.
8
Attach the Right & Left Axel Brackets JK to the outside
bottom of the curved legs C (there are holes provided)
using the M6 x 45mm bolts L and M6 nuts M.
Notice: the shaft on the axel brackets should be parallel
with the floor.
9
10
Press lever on lower wheel
axle JK to insert and
release wheels.
Use lower position for...
OPEN MOBILITY
Press lever on upper axle
position to insert and
release wheels.
Use upper position for...
FOLDED MOBILITY
5