Elipson Prestige Facet PF 6B Mode D'emploi page 14

UK
VI. EXTENSION INSTALLATION HOME - 7.1.2
1. Position of the Atmos speakers FHL/FHR (PF6ATM)
The Prestige Facet Atmos speakers are placed on top of the floor or bookshelf speakers.
DOLBY ATMOS® is a new technology meant to reproduce surround sound for cinema and
home cinema. This DOLBY ATMOS process creates vertical sound channels in addition to the
®
Dolby 5.1 or 7.1 format (horizontal plane) and thus offers a totally immersive audio experience.
In order to have access to this technology and experience the emotion of DOLBY ATMOS
you have to equip yourself, in addition to your 5.1 or 7.1 system, with dedicated loudspeakers
in order to emit sound vertically. There are speakers that are positioned directly in the
ceiling, but these require a considerable amount of time and effort to install. There are also
specific speakers that direct the sound to the ceiling from the floor. It is this second solution,
certified DOLBY ATMOS ® , that Elipson has adopted, simplifying the installation process. These
loudspeakers, whose drivers are specifically filtered and tilted, emit a sound field towards the
ceiling which must imperatively be reflective. The sound waves are thus reflected off of the
ceiling to allow the listener to benefit from this vertical sound dimension. The rendering is ultra
realistic, for a completely immersive experience in the heart of your movie. You can buy one
or two pairs of ATM speakers, placed at the front (1st pair) and also at the back (2nd pair) of
your dedicated home cinema room, directly on your main speakers or surround speakers. You
can also opt for the IXATM floorstanding loudspeaker with a built-in DOLBY ATMOS
In order to fully enjoy the DOLBY ATMOS
technology, and have enough channels and the associated digital processing technology.
Caution : A Dolby Atmos compliant amplifier is essential to the proper use of the speakers.
Contact your dealer for more informations.
•FHL
•FL
•SL
•SBL
•SBR
module.
®
® sound, your amplifier must be compatible with this
•SW
•C
•FHR
•FR
•SR
26
2. Connections on Home-Cinema amplifier and Home-cinema preamplifier
ALL THE CONNECTIONS MUST BE MADE WITH THE EQUIPMENT TURNED OFF.
It is essential to connect the speakers using the correct polarity. Make sure to connect the
« + » terminal of the speaker (Red) to the « + » output terminal of the amplifier. Then, make
sure to connect the « - » terminal of the speaker (Black) to the « - » output terminal of the
amplifier. A wrong connection would cause a cribled stereo image and loss of bass. Use
® ,
high quality speaker cable. Elipson speakers are supplied configured for use in a single
wired mode or bi-wiring. Bi-amp is also possible (see page 28).
FRONT
R
•SW •FR
PFSUB8 PF14F
or or
PFSUB10 PF24F *
or
PF34F *
Speaker Enter
•FR/FL FRONT RIGTH/LEFT
•C CENTER
•SR/SL SURROUND RIGTH/LEFT
•SBR/SBL SURROUND BACK RIGTH/LEFT
•SW SUBWOOFER
•FHL/FHR HEIGTH RIGTH/LEFT
*Depending your model
PRE OUT PRE OUT
SUBWOOFER SUBWOOFER
RCA SUB RCA SUB
SPEAKERS SPEAKERS
FRONT CENTER SURROUND SURROUND SURROUND SURROUND
L R L BACK R BACK L
•FL •C •SR •SL •SBR •SBL
PF14F PF11C PF7SR PF7SR PF7SR PF7SR
or or
PF24F * PF14C *
or
PF34F *
•SBR •SBL
PF6B PF6B
or
PF8B * PF8B
Description
Speaker Front rigth(R) /Left (L)
Central Speaker
Surround speaker rigth(R) /Left (L)
Surround back speaker rigth(R) /Left (L)
Subwoofer
Atmos speaker Front rigth(R) /Left (L)
27
HEIGHT HEIGHT
R L
•FHR •FHL
PF6ATM PF6ATM
or
*