Kärcher WINDSOR 1.012-070.0 Mode D'emploi page 13

23
24
7
Finally insert the mains cable into the cable cleat (23).
You can hear a "click" when the mains cable is fully
inserted. To take off the mains cable push the
button (34) next to the cable cleat (23) and remove
the mains cable.
34
22
Fit the attachment tube (7) into the swivel neck (21)
and then push the attachment tube handle (5) over
the projection (35). Push the black end of the hose
into the connecting tube (24) so that it clicks into
place. The hose can be taken off by squeezing the
retaining ring (3). The other end of the hose fits into
the attachment tube (7) only one way.
NOTE: If The Machine Does Not Work, Then The
Steps Above Have Not Been Executed Correctly.
3 Please Ensure The Parts Are Properly Pushed
Together, Especially The Cable Plug And Swivel
Neck.
86400000 - Sensor2
Operations
13