Control Panel - FAR TI16 CI Manuel D'utilisation

ENGLISH
these noises will cease. During use, you might
hear the noise of the fan, because sometimes
it switches itself on to reduce the appliance's
internal temperature.
SPECIFICATIONS
Model:
Voltage:
Power:
GB-6
FAR TI16CI
220-240 V ~ 50 Hz
2000 W

CONTROL PANEL

INSTRUCTION MANUAL
1. Press the ON/OFF button to start the appliance.
2. Adjust the heating power: Press the FUNCTION button once within 5 sec,
the digital display will show "1200", which indicates the heating mode has been
activated. Next, adjust the power level with the "+" and "-" buttons to one of the
following settings: 200 W - 400 W - 600 W - 800 W - 1000 W - 1200 W - 1400
W - 1600 W - 1800 W - 2000 W.
3. Adjust the keep warm function: Press the FUNCTION button again and the
digital display will show "180", which indicates the keep warm mode has been
activated. Next, adjust the heating level with the "+" and "-" buttons to one of the
following settings: 60°C, 80°C, 100°C, 120°C, 140°C, 160°C, 180°C, 200°C, 220°C,
240°C.
4. Set the timer: In heating mode, press the FUNCTION button once to activate the
timer setting mode, which allows you to set the length of time before the appliance
automatically switches off- the digital display will show "0".
1). Within the next 5 seconds, set the hour with the "+" and "-" buttons, up to a
maximum of 3 h. Hold one of the buttons down to cycle through the numbers
quicker, or simply press and let go to change the number by 1.
Note: If you do nothing in the next 5 seconds after pressing the FUNCTION
button, the hour setting mode will be cancelled.
2). Then set the minutes to a value between 0 and 59. If you do not adjust the
minutes within 5 seconds, the minute setting mode will be cancelled.
3). Press the TIMER button to confirm the time you have set, and the appliance
will beep.
5. The appliance will automatically switch off if you do not press any buttons for 2 h.
ENGLISH
GB-7