Operating Instructions; Vga And Hdmi Function - Braun DigiFrame 2050 Mode D'emploi

BN_DF2050_GB.qxd 06.05.2011 15:47 Uhr

3 Operating instructions

• Switch into signal source
When the OSD is inactive, press "SOURCE" key to
change the source input (DPF,HDMI,VGA) .
• To Display and Select the OSD Functions:
Pressing OSD key and then pressing
ect the different OSD control option.
• Adjust the value of every menu item:
When the icon you will adjust is highlighted, pres-
sing OSD key to make it to be selected, and then
pressing or to change the value of the selec-
ted OSD control option. After adjusting values,
press "EXIT" to exit current OSD control option, the
monitor will automatically save the changes.

4 VGA and HDMI Function

OSD MENU INTRODUCTION
"Color"menu:
• Brightness: Adjust image brightness.
• Contrast: Adjust image contrast.
• Color Temp: Adjust image color temperature
Seite 3
All manuals and user guides at all-guides.com
E N G L I S H
or to sel-
"Color Temp" submenu:
• 6500K: standard colour
• 9300K: cool colour
• User: You can adjust the values of color gain
"Adjust"menu:
• Auto Config: To adjust the geometrical parame-
• H Position: Adjust the horizontal position of the
• V Position: Adjust the vertical position of the
• Phase: To decrease the horizontal interference.
• Clock: To adjust the horizontal size of the image.
After setting, press EXIT or OSD key to exit.
(RED,GREEN OR BLUE). After setting ,Press
EXIT or OSD Key to exit
ters automatically for optimal display status.
image.
image.
9