Getting Started; Operating Instruction; Card And Usb; Picture Mode - Braun DigiFrame 850 Mode D'emploi

1 2

4. Getting Started

4.1 Extend the digital photo frame bracket on the
back of the frame to the widest position for grea-
test stability, and then plug one end of the included
AC adapter into a standard 110-240V AC electrical
outlet and the other end into the right side the
frame.
4.2. Remove the protective film covering the LCD.
4.3. Remove the plastic battery insulator from the
battery compartment and make sure the remote
control has a battery inside. Please refer to "Instal-
ling & Replacing Battery" if you need a new battery.
4.4. Power on the unit by pressing the Power but-
ton on the remote control or at the front of the unit.

5. Operating Instruction

After turning on the unit, it will show the startup
picture, press RETURN to get to the card select
interface.
E N G L I S H

5.1 Card and USB

It supports SD/SDHC/MMC/MS and USB 2.0. After
inserting a card or USB device, slideshow will play
automatically, then press RETURN twice to access
to photo, file, calendar and setup. Press OK ( II)
to confirm.
Note:
1. Make sure there are supported picture files,
music an video files in the Card or USB device.
2. If there are supported picture and music files in
the Card or USB Device, slideshow will play
automatically with background music.

5.2 Picture Mode

Press RETURN to choose "MEMORY CARD" in the
main menu. Highlight Photo, press OK ( II) to
access to the nine-picture mode, use
choose the picture, press OK ( II) to play the pic-
ture in single window.
Press OK to start slideshow pictures in the selected
slide mode.
to