ATTACHING/REMOVING THE GRASS BAG
WARNING:
first stopping the motor, removing the battery pack, and waiting for until the blade has
stopped rotating.
NOTICE:
Remove the mulching insert or side-discharge chute before attaching the
grass bag on the mower.
1. Remove the battery.
2. Adjust the handle to the Grass Bag Attachment/Removal Position (please see
ADJUSTING THE FOLDABLE HANDLE).
3. Lift the rear-discharge door.
4. Hook the grass bag assembly on
the pivot rod (Fig. 20). Release the
discharge door so that it rests on
the grass bag.
5. To remove the grass bag, lift the
rear-discharge door on the mower.
Lift the grass bag up, off of the pivot
rod.
6. Release the discharge door.
WARNING:
hooks on the grass bag is firmly seated on the pivot rod and the rear-discharge door
rests firmly against the top of the grass bag.
WARNING:
reduce the risk of injury, frequently inspect the bag assembly and replace the bag if
there are any signs of wear or deterioration. Use only grass bags manufactured for this
mower.
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC/LM2150SP/LM2150SP-FC
Do not at any time make any adjustment to the lawn mower without
When using the grass bag, never operate the mower unless the
Under normal usage, the grass bag material is subject to wear. To
20
Rear Discharge
Door
Pivot rod
Hook
29