ProMed 3020 Instructions D'utilisation page 25

o
PeratinG tHe unit
1. Selection of the rotation direction:
You make this selection by turning the rotary knob (E) to the left
or right. The rotation direction will also be shown on the display.
Counter-clockwise: the device runs backwards and the display
shows
Clockwise: the device runs forwards and the display
shows .
2. Selection of speed:
The speed is regulated by turning the rotary knob (E) to the left
or to the right. The more you turn, the higher the rotation speed.
A hand symbol will simultaneously appear on the display next to
the speed and rotation direction.
3. Use of the foot pedal:
Connect the foot pedal (I) to the socket (G). A foot symbol will
appear on the display. Set the rotation direction and speed
by turning again the rotary knob (E). The device is now in the
standby mode. Switch on the device by pressing the foot pedal.
The grinding head will begin to rotate in the direction and at the
speed selected by you. By pressing again the foot pedal, you
can switch again into the standby mode. To switch off the device
completely, move the power switch (D) into the "OFF" position.
Note:
You may use only Promed foot pedals.
DE
US
FR
IT
ES
NL
RU
PL
SE
FI