Delta 210-340 Série Manuel D'utilisation page 4

A.
2
2
B.
2
1
Spout Installation
Insert light pipe (1) into the small hole
A.
in gasket (2), as shown. Ensure the
light pipe is properly seated (3) within
the gasket.
Insert the light pipe through base
B.
hole (1) and align the gasket inside base
groove (2).
4 1-800-345-DELTA (3358)
www.deltafaucet.com
1
3
C.
3
2
1
4
5
Slide the remaining tubes through
C.
the base. Make sure the sensor light
(1) is facing front, by positioning the
light pipe header (2) inside the body
orientation slot (3). Insert tube (4), to
the red line marked on the tube, into
red collet (5). After inserting pull up
to engage.
5
Red
Mark