Acova Z23020 Notice D'utilisation page 45

RF_prog:RF_prog_ACOVA_7L 22/10/2010 09:20 Page43
4.3 (CF03) -
Press + or - to set this value to 0, then press
OK to confirm and move to the next menu.
4.4 (CF04) -
Press + or - to set this value to 0, then press
OK to confirm and move to the next menu.
4.5 Cycle mode (CF05)
Press + or - to set this value to 0, then press
OK to confirm and move to the next menu.
: enabled
1 : disabled
If the device is associated with other X2D
home automation products (transmitters,
remote controls, alarm system, PLC unit,
etc., except door/window sensors), set this
value to 1.
NOT AVAILABLE ON THIS MODEL
NOT AVAILABLE ON THIS MODEL
EN
43