Manual Mode - Acova Z23020 Notice D'utilisation

RF_prog:RF_prog_ACOVA_7L 22/10/2010 09:19 Page41

3.4.3 Manual mode

By pressing the
to a setpoint temperature different from
that defined in your Auto mode program for
a predetermined period of between 30
minutes and 72 hours.
When in automatic mode (
button.
The manual mode duration will blink. Press
+ or - to increase or decrease the desired
duration in 30 minute increments. Press
to confirm.
The temperature will blink. Press + or - to set
the desired temperature.
Press to confirm.
OK
To cancel manual mode, press button
turn the dial.
3.5 No Heat mode
To put the radiator into No Heat mode
(in summer, for example), turn the dial
to . The thermostat will display the
measured room temperature.
button, you can switch
), press the
AUTO
OK
or
C
Manual mode active
Room temperature
41
EN